 The interior wall brick is a kind of brick used for interior wall decoration. We are skilled in paving. Today, we will follow the interior wall brick manufacturer to learn how to * * * pave the interior wall brick. I hope it can help you!
1、 Before paving, soak the inner wall tiles in clean water for about an hour until they do not bubble, take out the water on the tile surface, and apply an appropriate amount of water on the leveling layer, then evenly plaster the back of the tiles with 1:2 cement mortar with a thickness of 5-6 mm. When paving large-sized inner wall tiles, properly thicken them, then paste the tiles, gently tighten them with a wood cone or rubber hammer, and then level them with a ruler or level ruler.
2、 During paving, 2-3 mm mortar joints shall be reserved between the tiles according to actual needs to prevent the tiles from falling off and hollowing due to different coefficient of thermal expansion and contraction between the wall and the tiles.
3、 After pasting a certain area, fill and scrape the brick joints with sealant, and then clean the dirt on the brick surface with a rag dipped in water, and * * * maintain.
4、 It shall be noted that the tile arrangement scheme shall be determined according to the design paving requirements when snapping the line, and the tile position and tile joint position line shall be popped on the dry leveling layer.
        |
