Medium Density Board / Veneer Density Board

Keywords:  Medium Density Board / Veneer Density Board

Product Name: Medium Density Board / Veneer Density Board  Specification: 1220*2440*2-25mm, 1220*3050/1220*4880*12-18mm Glue: E2, E1, E0 Product characteristics: easy to process, it can be processed into various patterns and shapes on its surface, and it is a good material for domestic and foreign furniture making. The surface of the density board is smooth and flat, the material is fine, the performance is stable, the edge is firm, and the surface of the board is well decorated. The purpose of MDF: Mainly used for laminated wood floors, door panels, partition walls, furniture, etc., MDF is mainly used for surface treatment of oil mixing process in home decoration; MDF can also be used for indoor and outdoor decoration, office and civil use Furniture, audio, vehicle interior decoration, can also be used as computer room anti-static floor, wall panels, anti-theft doors, wall panels, partitions, etc., and it is also a good material for packaging.  Identification of density board: 1. Check whether the thickness and density are uniform, whether the corners are damaged, whether there are delamination, bulging, carbonization, etc., and whether there are soft parts. 2. When possible, saw a small piece of density fiberboard and soak it in water with a water temperature of 20°C for 24 hours to observe the thickness change and observe whether there is a small bulge on the board surface. The thickness changes greatly, and there are small bulges on the board surface, indicating that the board surface is poor in water resistance. 3. Choose low-emission density fiberboard, use smell when choosing, should choose less irritating density fiberboard, because the greater the smell, the higher the formaldehyde emission, and the greater the pollution caused.

back